Latest Frimwares for Linksys Devices.

Latest Firmware updates.

.

Product	Ver	Firmware	Link
WAG54GS	1	1.01.03	tinyurl.com/3c2lt4
WAG200G	1	1.01.06	tinyurl.com/2lfwyx
WAG160N	1	1.00.09	tinyurl.com/5fbrqe
WAG300N	1	1.01.07	tinyurl.com/3dw9wc
WAG325N	1	1.00.12	tinyurl.com/39mbyp
WAG54G	1	1.02.1	tinyurl.com/3dbaae
	1.2	1.02.1	tinyurl.com/3dbaae
	2	1.01.15	tinyurl.com/3dbaae
	3	to be released	NA
WAG54GX2	1	1.00.09	tinyurl.com/2rwrqy
WAG54GP2	2	2.01.06	tinyurl.com/2awxqy
WAG354G	1	1.01.11	tinyurl.com/2pebgp
	2	1.01.58	tinyurl.com/2pebgp
WRT54G	1 to 4	4.21.1	tinyurl.com/2wa88v
	5 & 6	1.02.5	tinyurl.com/2wa88v
	7.0	7.00.4	tinyurl.com/34sokc
	7.2	7.2	tinyurl.com/34sokc
	8.0	8.00.5	tinyurl.com/2wa88v
	8.1	8.01.08	tinyurl.com/2wa88v
	8.2	8.2.05	tinyurl.com/2wa88v
WRT54GS	1 to 3	4.71.4	tinyurl.com/23ftwj
	4	1.06.3	tinyurl.com/23ftwj
	5 & 6	1.52.5	tinyurl.com/23ftwj
	7	7.50.5	tinyurl.com/23ftwj
	7.2	7.2.05	tinyurl.com/23ftwj
WRT54GC	1	1.05.7	tinyurl.com/2j5dvt
	2	1.01.0	tinyurl.com/yo33ty
WRT54GX	1	1.02.15	tinyurl.com/2by6rk
	2	2.00.20	tinyurl.com/2by6rk
WRT54GX2	1	1.01.22	tinyurl.com/3cd8hu
	2	1.00.08	tinyurl.com/3cd8hu
WRT54GL	1	4.30.12	tinyurl.com/3cumyo
WRT54GR	1	1.03	tinyurl.com/yulxxj
WRT100	1	1.0.02	tinyurl.com/yvetm6
WRT150N	1	1.51.3	tinyurl.com/yu9cc7
WRT160N	1	1.02.2	tinyurl.com/6q5nbs
WRT330N	1	1.00.4	tinyurl.com/364alr
WRT300N	1	2.00.13	tinyurl.com/yp4wte
	2	2.00.20	tinyurl.com/yp4wte
WRT350N	1	1.03.7	tinyurl.com/28bowq
	2	2.00.17	tinyurl.com/2dt3wo
WRT600N	1	1.01.36	tinyurl.com/yuxfyo
WRE54G	1	1.06.05	tinyurl.com/24nkxj
	2	2.1.12	tinyurl.com/24nkxj
	3	3.04.1	tinyurl.com/24nkxj
WAP54G	1 & 1.1	3.04	tinyurl.com/3yracn
	2 & 3	3.05.3	tinyurl.com/yrklox

WRT150N with DU in U.A.E.

How to configure WRT150N in U.A.E with the ISP DU.

• Connect a computer to WRT150N to any of the 4 ports.


• Most of the times DU doesnt provide a modem cause its not required.


• There is a Ethernet [Cat5] cable that should be connected straight to WRT150N.


• Reset WRT150N for 20 seconds. The reset button is at the rear side of the router.


• Turn OFF the WRT150N. Power it ON after 5 seconds.


• Try Internet from the Computer connected to the router.


• You should be able to go online. You can change the name of the Wireless Network.


• Click on Wiereless Tab and configure the wireless settings there.


• This process applies to all Linksys routers like WRT54G, WRT54GR, WRT54GC, WRT54GL, WRT54GS, WRT100, WRT150N, WRT160N, WRT300N, WRT310N, WRT330N, WRT350N, WRT600N, WRT610N etc.

WRT54GR and WRE54G v3.

How to connect the WRE54G to WRT54GR.

WRE54G uses Wireless Distribution System to communicate with the wireless devices.

• Make sure the firmwares on both the devices are latest.
• Connect a computer to the WRT54GR.
• Connect the WRE54G to WRT54GR.
• On the computer Open Internet Explorer [or any browser].
• In the address bar type : 192.168.1.1 [default IP Address] a popup should appear.
• Make sure the Popup blocker is Disabled.
• The default password is admin.
• Once in the Setup page click on Wireless [Second TAB on the top].
• In this TAB you can configure the wireless settings for tyhe router like the MODE, Name of the network [SSID] and the CHANNEL.
• Whatever settings you do here you need to copy the same on the Range Expander.
• Minimise the WRT54GR Setup Page. Open a new Internet Explorer.
• In the Address Bar type : 192.168.1.240 [Default IP Address of WRE54G].
  The default password is admin.
• Once in the Setup page configure the wireless settings same as that of the WRT54GR.
• Also if the wireless network is encrypted, do the relevant settings on the Range Expander.
• Save Settings. Turn OFF the WRT54GR and WRE54G.
• Place the WRE54G where the signal is weak.
• Turn the WRT54GR ON wait for 10 seconds.
• Turn the WRE54G ON. Check the lights.
• The ACTIVITY led lights up whenever there is a successful wireless connection and will flash whenever there is wireless network activity.
• The LINK led lights up when the Range Expander is powered ON. This light will appear blue when the Range Expander is connected to a functioning Access Point or wireless router. It will light up RED when there is NO Access Point or Wireless router to connected to or the settings on the RE does not match with the router.