Firmware 1.01.09 for WAG200G officially released

The firmware 1.01.09 is officially realeased for WAG200G.

Click here to Download the unzipped version.

Click here to visit the official page.

Firmware released for WAG160N : 1.00.12

Firmware 1.00.12 released for WAG160N.

Release Date: 09 Mar, 2009
Firmware Version: 1.00.12 (ETSI)

Features :

1. DownloadSpeedTest(), DUT web UI(port 80) will be inaccessible if set buffer size to a large number
2. v1.00.11, Wireless, Fail to find wireless SSID after set WPA password with "linksys" (7 chars)
3. GetWLanRadios() cannot return correct WideChannel information
4. GetDeviceSettings2() will return wrong country code for United Kingdom.
5. Fix bug that SIP call can not be initialized from WAN to LAN if the SIP Invite packet of the SIP Server does'nt include port information.
6. Atheros driver's changelist from 6.1.1.98 to 6.1.1.111:

• Add FCC6 for Australia and Canada 5GHz.
• Fixed problem in broadcast performance.
• Disabled power constraint element when country IE is enabled on 2.4GHz channels since some stations will misunderstand the Power Constraint element and cause tx power to be set incorrectly.
• Re-enabled 11n NF periodic Calibration
• Fixed a problem where STA cannot reassociate to AP after beacon stuck & HW reset.
• Enhanced dynamic allocation of TID buffers on ADDBA
• Fixed throughput degradation issue during downstream TCP legacy co-existence tests
• Addressed multiple BSSID performance issue.

Firmware 1.01.09 released for WAG200G

Firmware 1.01.09 for WAG200G is now released.

The firmware is not yet officially released by linksys.
You can download the firmware here.

For instructions on upgrading firmware. click here.

Firmware 1.00.10 released for WAG160N.
Firmware fixes :

1. HNAP: FW writes settings back to flash when doing HNAP Getxxx.
2. Outbound SIP call dropped in 25 seconds at sipphone.com, CBO, SIP.
3. Web administrator username should be case insensitive, CBO, username
4. HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAP Hnap wireless channel issue
5. HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP
6. HNAP SetWlanRadioSettings: FW returned "ERROR_BAD_WIDTH" when setting channel bandwidth 40, CBO, HNAP
7. HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP
8. HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP
9. HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP
10. 10. DUT should be in WPA2-Mixed mode after WPA/WPA2 configuration by setup wizard, CBO, Setup Wizard

Click here to download the firmware

Latest Frimwares for Linksys Devices.

Latest Firmware updates.

.

Product	Ver	Firmware	Link
WAG54GS	1	1.01.03	tinyurl.com/3c2lt4
WAG200G	1	1.01.06	tinyurl.com/2lfwyx
WAG160N	1	1.00.09	tinyurl.com/5fbrqe
WAG300N	1	1.01.07	tinyurl.com/3dw9wc
WAG325N	1	1.00.12	tinyurl.com/39mbyp
WAG54G	1	1.02.1	tinyurl.com/3dbaae
	1.2	1.02.1	tinyurl.com/3dbaae
	2	1.01.15	tinyurl.com/3dbaae
	3	to be released	NA
WAG54GX2	1	1.00.09	tinyurl.com/2rwrqy
WAG54GP2	2	2.01.06	tinyurl.com/2awxqy
WAG354G	1	1.01.11	tinyurl.com/2pebgp
	2	1.01.58	tinyurl.com/2pebgp
WRT54G	1 to 4	4.21.1	tinyurl.com/2wa88v
	5 & 6	1.02.5	tinyurl.com/2wa88v
	7.0	7.00.4	tinyurl.com/34sokc
	7.2	7.2	tinyurl.com/34sokc
	8.0	8.00.5	tinyurl.com/2wa88v
	8.1	8.01.08	tinyurl.com/2wa88v
	8.2	8.2.05	tinyurl.com/2wa88v
WRT54GS	1 to 3	4.71.4	tinyurl.com/23ftwj
	4	1.06.3	tinyurl.com/23ftwj
	5 & 6	1.52.5	tinyurl.com/23ftwj
	7	7.50.5	tinyurl.com/23ftwj
	7.2	7.2.05	tinyurl.com/23ftwj
WRT54GC	1	1.05.7	tinyurl.com/2j5dvt
	2	1.01.0	tinyurl.com/yo33ty
WRT54GX	1	1.02.15	tinyurl.com/2by6rk
	2	2.00.20	tinyurl.com/2by6rk
WRT54GX2	1	1.01.22	tinyurl.com/3cd8hu
	2	1.00.08	tinyurl.com/3cd8hu
WRT54GL	1	4.30.12	tinyurl.com/3cumyo
WRT54GR	1	1.03	tinyurl.com/yulxxj
WRT100	1	1.0.02	tinyurl.com/yvetm6
WRT150N	1	1.51.3	tinyurl.com/yu9cc7
WRT160N	1	1.02.2	tinyurl.com/6q5nbs
WRT330N	1	1.00.4	tinyurl.com/364alr
WRT300N	1	2.00.13	tinyurl.com/yp4wte
	2	2.00.20	tinyurl.com/yp4wte
WRT350N	1	1.03.7	tinyurl.com/28bowq
	2	2.00.17	tinyurl.com/2dt3wo
WRT600N	1	1.01.36	tinyurl.com/yuxfyo
WRE54G	1	1.06.05	tinyurl.com/24nkxj
	2	2.1.12	tinyurl.com/24nkxj
	3	3.04.1	tinyurl.com/24nkxj
WAP54G	1 & 1.1	3.04	tinyurl.com/3yracn
	2 & 3	3.05.3	tinyurl.com/yrklox

LELA

Linksys Easy Link Advisor

Linksys Easy Link Advisor (LELA) is an application distributed by Linksys that provides an easy way to setup, manage, view, add and repair the network. Its like having a Linksys geek in your home helping you to get the most out of your home network. LELA comes with all the new routers from Linksys. Linksys EasyLink Advisor automatically sets up your home network. LELA can locate every computer, router, storage unit, camera, print server and other device connected to your network. If you already have a wireles router / modem, LELA can help you to optimise the performance of the network by simplyfing the addition of devices and providing an overview of all the devices those are installed. LELA works in the background, watching your network. It will alert you of new devices, poblems, security vulnerabilities and the updates. LELA 3.0 can be used with any routers that have firmware consist of HNAP.




Look at the following pics and you'll see how easy it is to install and use LELA.


You can select any device from the list as shown in the picture and view its details like the IP Address or MAC Address and even configure the wireless settings like Changing the SSID and Enabling/Disabling the wireless encryption. You can also change the router's password here. Now you nomore need to open the setup page to change the router's password or to configre the wireless settings. It also displays the number of computers and other network devices and their names along with an appropriate icon. You can refresh the page anytime. The refresh button is on the top right hand side. You can kick out any device at any time.

Follow the Welcome Screen to add a computer or any networking device to the network. If you exit the welcome screen, you can add/remove the computers or devices anytime from the LELA application. To connect any device wireless to the network, you need to know the name of the network (SSID) and the encryption (wireless security). You can view the name of the network from the wireless devices and connect. You can change the wireless encryption anytime, but changing the wireless security setting on the router will affect all the wireless devices connected to the router / modem. You'll need to configure the wireless settings on all the computers/devices connected to the router.

While LELA was originally designed for Linksys' N routers, it will still work with most of Linksys' G routers. Linksys recommends that you install Windows XP or Vista (x64 and x86) Operating System on your computer. A minimum of 512 MB RAM is required (1 GB is recommended). The network map shows your network devices, the name of your wireless network (SSID), network status, menu options, alerts (if any), and updates (if any). You can manually check for the updates (From network map/list, click on the Updates button, and then select Check for Updates). It also shows you if any unauthorised device is trying to access your network as shown in the picture. You can stop the Internet access to that device anytime. You can even Print the Network Settings. To change the language, On the network map/list, click on File > Preferences > Language. At the initial launch of LELA 3.0, only the WRT160N and the WRT310N firmware will contain HNAP.

Firmware Release for WAG160N.

New Firmware Released for WAG160N.

Firmware Version : 1.00.09 (ETSI)

Release Date : 23 May, 2008

Fixes :

- Fixes issue with FTP failure after 2 days.

- Fixes issue with Cisco IPSec client

- Fixes issue with slowdown when using Azureus in MAC OS

- Fixes issue with SIP registeration when WAN IP Address changes

- Fixes issue with WUSB300N client over WPA-TKIP

- Change GUI display

Click here to download the firmware.

Firmware Release for WAG200G.

New Firmware Released for WAG200G.

Firmware Version : 1.01.06 (ETSI)
Release Date : 17 December, 2007

Fixes :
- Fixes security issue with XSS and CSRF.
- Fixes security issue with XSS and CSRF.
- Fixes issue with UPnP crash when opening 10+ port forwarding.
- Fixes issue with port 5190, 5566, 4443 opening.
- Fixes issue with DSL performance degradation when running P2P program for long time.
- Fixes issue with Access Restriction
- Use new Cisco/Linksys Logo.
- Added Single Port Forwarding entries to 20.

Click Here to download the firmware.

Firmware Release for WAG54GS.

New Firmware Released for WAG54GS.

Firmware version : 1.01.03
Release Date : 17 August 2007

Fixes :
- Adds languange select option on the Basic Setup page
- Resolves issue with XSS & CSRF security
- Resolves issue with WWW access when static MTU is set
- Resolves issue with UPnP failure with Mac OS Lighthouse application
- Resolves issue with P2P applications
- Resolves issue with E-mail alert characters
- Resolves issue with configuration of multiple Access Restriction policies
- Resolves issue with open ports 4443, 5190, and 5566 during port scan
- Resolves issue with GUI display with Windows 120DPI setting
- Resolves issue with AT&T VPN client

Click here to download the firmware.

Cannot connect wireless with WAG54GS.

Error : Limited or No Connectivity.

This issue is encountered with WAG54GS with any of these firmwares : 1.00.06, 1.00.08, 1.00.00, 1.00.10, 1.00.12, 1.01.00, 1.01.01.

Solution : Upgrade the firmware to 1.01.03.

For instructions on upgrading firmware, Click Here.

How to upgrade the firmware on Linksys routers.

How to upgrade the firmware on Linksys routers.

Following are the steps to upgrade the Firmware on Linksys routers.
This process applies to almost all Linksys Products.

Disconnect all wireless clients from the router during the upgrade process. Make sure no wireless clients attempt to associate with the router until the upgrade process is complete.

Step 1 :
Download the firmware from the Linksys Website and save it on the desktop in a new folder called Linksys. The file might be zipped. So unzip the files first.




Step 2 :
Open the setup page of the router. To open the setup page, open Internet Explorer from a computer connected to the router. In the Address Bar type 192.168.1.1. The default password is admin.

Step 3 :
After upgrading the firmware, reset the router for 30 seconds. To reset the router, locate the reset button on the router and press it with a pointed object when the router is ON.

Step 4 :
After resetting the router, turn OFF the Router and the Modem. Keep them OFF for sometime and then turn the Modem On first, wait until all the lights are solid, then the router.

Step 5 :
And its Done !!!
Hakunamatata !

Change the Language on WAG54GS !

How to change the language on WAG54GS.

• WAG54GS with firmwares 1.00.00, 1.00.10, 1.00.12 and 1.01.01 tends to change the default language to French.
• To change the language, open the Setup page, click Adminstration TAB on the TOP.
• Under Administration there are certain Sub TABs, select Firmware Upgrade [Sixth Subtab].
• Here you can change the Language.
• The Best practise is to upgrade the firmware.

Firmware Release for WAG200G

New Firmware Released for WAG200G.

Firmware Version : 1.01.04 (ETSI)
Release Date : 04 April, 2007

Fixes :
- Fixes issue with incorrect upstream/downstream transmit power display on DSL Connection page
- Fixes issue with ATT VPN client not connecting to ATT VPN network
- Fixes issue with Security information disclosure for UDP port scan packet

Click here to download the firmware :

Firmware Release WRT54GC

New Firmware Released for WAG160N.

Firmware Version: v1.05.7
Release Date : 04/12/2007


Fixes :
- Resolves security issue with UDP port 916 reported by Secunia and Daniel Niggebrugge by allowing users to disable the use of the setup wizard.

Click here to download the frimware.

Firmware Release for WAG54GX2.

New Firmware Released for WAG54GX2.

Firmware version : 1.00.09
Release Date : February 22, 2006


Fixes :
- Resolves issue with duplicate 128-bit WEP Keys when using Generate button.
- Resolves issue with data transmission through IPSec VPN tunnel over PPPoA.
- Resolves issue with PPTP Passthrough over PPPoA.
- Resolves issue with missing time zones.
- Resolves issue with continuous reboot for incorrect PPPoA authentication.
- Resolves issue with DDNS status message.
- Updated all configured remote management ports to use HTTP protocol.
- Updated wireless security help page to include WPA/WPA2 Enterprise.
- Updated advanced wireless setting ranges.

Click here to download the firmware.

Tomato Firmware !

Tomato Firmware for Linksys Routers.

What is Tomato Firmware ?
Tomato is free open source Linux-based firmware for several Broadcom-based Wi-Fi routers. The major emphasis of Tomato is on stability, speed and efficiency. It is maintained by Jonathan Zarate, who also developed HyperWRT +tofu. Click here to go to the official Website.

Tomato is NOT compatible with Linksys WRT54G/GS v5-v7 or newer WRT54G/GS routers. These routers do not run Linux. The Linksys WRT54GL router is best if you are interested in making a Tomato-compatible purchase.

Firmware Release for WAG54GS.

New Firmware Released for WAG54GS.

Firmware version : 1.00.12 (Annex A).
Release Date : 06 December 2005.

- Fixes issues with SES function causing configuration loss.
- Added Incoming and Outgoing log to GUI[Graphical User Interface].

Click here to download the firmware.