Front Panel & Lights - NSLU2.

Front Panel & Lights - NSLU2.

Front Panel & Lights

Ready/Status This LED will begin blinking when you turn on the Storage Link. This is the Storage Link running a self-test. When this test has completed, the LED will appear solid green.
An Amber LED indicates an error with the Storage Link.

Ethernet Green. The Ethernet LED serves two purposes. If the LED is continuously lit, the Network Storage Link is successfully connected to a device through the Ethernet port. A blinking LED indicates network activity.

Disk 2 This will light up when a Flash disk or USB hard drive is connected. When the light is blinking slowly, this means the disk or drive can be disconnected. A fast blinking light means data is being transferred over your network.

Disk 1 This will light up when a USB hard drive is connected. A blinking LED indicates network
Activity.

Power Switch The power switch is a "soft switch". If the Storage Link is powered off, you can start it up by briefly pressing the power switch. To power down the Network Storage Link, press the power switch, and wait for it to shutdown and the LEDs to turn off.

NSLU2 !

The NSLU2 (Network Storage Link for USB 2.0 Disk Drives) is a Network Attached Storage (NAS) device introduced in 2004 and discontinued in 2008. It makes USB Flash memory and hard disks accessible over a network using the SMB protocol (also known as Windows file sharing or CIFS). It was superseded mainly by the NAS200 (enclosure type storage link) and in another sense by the WRT600N which combines a wifi router with a storage link.
The device runs a modified version of Linux and by default, formats hard disks with the ext3 filesystem, but a firmware upgrade from Linksys adds the ability to use NTFS and FAT32 formatted drives with the device for better Windows compatibility. The device has a web interface from which the various advanced features can be configured, including user and group permissions and networking options. It runs on almost all systems. It does not make much noise and can also be used as a Web Server..

• USB 1.1 & USB 2.0 compliant
• Port 1: USB HDDs (DOES NOT RECOGNIZE FLASH DRIVES)
• Port 2: USB Flash Drives (detected only by port 2)

The Default IP Address of NSLU2 is 192.168.1.77. To reset the device press the reset button down for 3 seconds it will beep once to indicate the reset has occurred. The default password is "admin".

Important: Resetting the Network Storage Link will erase all of your settings and replace them with the factory defaults. Do not reset the Network Storage Link if you want to retain the settings. Data on the drives is NOT lost even if the unit is reset to Factory Defaults.

The device includes 32 MB of SDRAM, and 8 MB of Flash memory. It also has a 100 megabit Ethernet network connection.

The Network Storage Link features built-in disk utilities that are accessible through your web browser. You can format a drive for initial use, and scan the disk for errors. If you've installed a second Network Storage Link, you can back up data from one Network Storage Link to the other. You can also automatically back up data to or from a shared folder on a Windows system on your network.

For even more flexibility and utility, the Network Storage Link can be set up to be accessible directly from the Internet, which allows access to stored files via a web browser. Files can be available publicly in your network, or you can create password-protected accounts for your authorized users. You can format new disk drives, and scan drives for errors. The built-in backup program lets you schedule full, incremental, or synchronization backups of your network drives to the Network Storage Link, or vice versa. It will even send you an email message when a hard drive gets nearly full, completely full, or has an error.

Validating Identity.

I have a WAG160N. Im able to go online from the computers connected to the modem with ethwrnet cable. However when i try connecting from computers those are wireless, im getting this error : Windows cannot find a certificate to logon to the network.
What do i do ?


Solution :

• Right click wireless connection icon
• Click on view available wireless network
• Than click on change advance settings inte left(SP2) or Advance(SP1)
• Click the second TAB on the top [Wireless networks]
• Clear preffered networks. Click on ADD below preffered network box.
• Put in the details for the titles mentioned below

Association(Tab)

• Network Name (SSID) : Put in your wireless network name
• Data Encryption should be check
• Network Authentication(Shared mode) should be unchecked
• Uncheck the box "The key is provideded for me automatically" and put the network key and confirm it.

Authentication(Tab)

• Check Enable IEEE 802.1x
• Now uncheck Authenticate as Computer when computer info is available
• Now uncheck Authenticate as as guest when user or Computer when computer info is unavailable
• Uncheck Enable IEEE 802.1x
• Click OK. Restart the computer. Should start working.

Also if you change the wireless security to WPA2 Personal, the chances of getting the same error are minimal.

NAS200 - Download Manager !

The Download Manager is designed for users to initiate an FTP or HTTP download using a PC’s Web browser. Once the task is initiated, you may turn off the pc and NAS200 will continue the download independently. For instance if you are downloading a movie, you can use the NAS200 and use the computer for any other use or simply turn it off.


To configure the Download Manager, Open the NAS200 web based User Interface and click on Administration Tab. Than select System Options from the Left Hand Side. Here you can Enable / Disable the Download Manager. If the Download Manager feature has been enabled through the Administration > System Options screen and your login has Download Manager access, then the My Downloads option will also be displayed. On this Page in the Identification settings you can configure the network settings like the name of the device and the Workgroup. In the IP Address settings, you can set the device to either as a DHCP client or assign a Static IP Address. Its always recommeneded to assign a Static IP Address. Than comes the DNS Server settings option. Here too you can select between DHCP and static. Than there is WINS and DDNS that works with TZO. If you dont have an account with TZO, you can signup for one from this Option. Than there is Date & Time where you can enable and configure NTP and also see the status of the same. In E-Mail Alert you can configure upto 3 Emails that will be notified if any problem occurs. You need to specify the SMTP port number. Scheduled Shutdown enables you to schedule a Shutdown [:)]. And you have UPnP.

NAS200

Setting up NAS200.
Network Storage System with 2 Bays.

NAS200 is an ethernet connected network storage with two available SATA hard drive bays that adds shared storage directly to your network. You can add even more storage with two USB 2.0 ports for hard drive or flash USB storage devices and securely share files locally or through the Internet (FTP, HTTP) with no dedicated PC needed. It also includes an advanced backup software and a built-in media server for streaming to PC or UPnP AV digital media adapter.

To access the Setup Wizard, iInsert the Setup Wizard CD-ROM into your PC’s CD-ROM drive. The Setup Wizard should run automatically,and the Welcome screen should appear. If it does not, click Start and then Run. In the field provided, enter D:\SetupUtilizty.exe (if “D” is the letter of your CD-ROM drive). Setting up the NAS200 is very quick and simple as compared to other NAS devices. Don't loose the Setup CD cause you'll need it to configure every PC on your network as well as if you decide to swap out your hard disks for new ones or add a second drive. Fortunately, you can download the entire CD from Linksys' Web site and then simply copy it to a data CD should you ever lose the original. Setup NAS200 Install the Network Storage System for the first time. (The instructions are covered in the Quick Installation.) Set up Computer Configure another computer to use the Network Storage System. Setup Second Drive Add a second hard drive to the already configured Network Storage System. Exit Use this option to close the Setup Wizard. Backup Software Install a third-party program to run backup jobs. Advanced Setup Use this option to access the web-based utility. Install Utility Use this option to install the Network Drive Mapping Utility. User Guide Use this option to open the pdf of NAS200.

Step 1 is the Physical Installation. The Setup Wizard automatically searches for any Network Storage System on your network. If it is not detected, check its cable connections, and make sure it is powered on. Click Search Again to locate the Network Storage System. Select the appropriate Network Storage System. Click Next. To install the second hard drive:
Power off the Network Storage System. Push together the clips, and remove the lower drive bay door. Lift up the ribbon. Make sure the connector side of the drive faces the bay, and the label side faces up. Make sure the drive is inserted under the ribbon. Push the drive in until it snugly fits in the bay. Replace the drive bay door. Wait until you hear the Network Storage System
beep twice. Then click Next. The NAS200 has an easy array of options for configuring your internal disks. With two disks installed, you can run them as separate volumes, one large volume or have the two play off each other in RAID 0 or RAID 1 configurations. All this is done in a few mouse clicks. But beware, changing a disk or recovering from a disk crash with a new one means rebuilding the NAS200 from the ground up. So be sure to backup the NAS200 occasionally, too. Once your NAS200 goe through basic setup, you can maintain it or enable advanced features from a Web-based administration console. Or you can simply browse the box using a Web browser, which is especially useful if you've enabled the FTP server option