NAS200 - Download Manager !

The Download Manager is designed for users to initiate an FTP or HTTP download using a PC’s Web browser. Once the task is initiated, you may turn off the pc and NAS200 will continue the download independently. For instance if you are downloading a movie, you can use the NAS200 and use the computer for any other use or simply turn it off.


To configure the Download Manager, Open the NAS200 web based User Interface and click on Administration Tab. Than select System Options from the Left Hand Side. Here you can Enable / Disable the Download Manager. If the Download Manager feature has been enabled through the Administration > System Options screen and your login has Download Manager access, then the My Downloads option will also be displayed. On this Page in the Identification settings you can configure the network settings like the name of the device and the Workgroup. In the IP Address settings, you can set the device to either as a DHCP client or assign a Static IP Address. Its always recommeneded to assign a Static IP Address. Than comes the DNS Server settings option. Here too you can select between DHCP and static. Than there is WINS and DDNS that works with TZO. If you dont have an account with TZO, you can signup for one from this Option. Than there is Date & Time where you can enable and configure NTP and also see the status of the same. In E-Mail Alert you can configure upto 3 Emails that will be notified if any problem occurs. You need to specify the SMTP port number. Scheduled Shutdown enables you to schedule a Shutdown [:)]. And you have UPnP.

NAS200

Setting up NAS200.
Network Storage System with 2 Bays.

NAS200 is an ethernet connected network storage with two available SATA hard drive bays that adds shared storage directly to your network. You can add even more storage with two USB 2.0 ports for hard drive or flash USB storage devices and securely share files locally or through the Internet (FTP, HTTP) with no dedicated PC needed. It also includes an advanced backup software and a built-in media server for streaming to PC or UPnP AV digital media adapter.

To access the Setup Wizard, iInsert the Setup Wizard CD-ROM into your PC’s CD-ROM drive. The Setup Wizard should run automatically,and the Welcome screen should appear. If it does not, click Start and then Run. In the field provided, enter D:\SetupUtilizty.exe (if “D” is the letter of your CD-ROM drive). Setting up the NAS200 is very quick and simple as compared to other NAS devices. Don't loose the Setup CD cause you'll need it to configure every PC on your network as well as if you decide to swap out your hard disks for new ones or add a second drive. Fortunately, you can download the entire CD from Linksys' Web site and then simply copy it to a data CD should you ever lose the original. Setup NAS200 Install the Network Storage System for the first time. (The instructions are covered in the Quick Installation.) Set up Computer Configure another computer to use the Network Storage System. Setup Second Drive Add a second hard drive to the already configured Network Storage System. Exit Use this option to close the Setup Wizard. Backup Software Install a third-party program to run backup jobs. Advanced Setup Use this option to access the web-based utility. Install Utility Use this option to install the Network Drive Mapping Utility. User Guide Use this option to open the pdf of NAS200.

Step 1 is the Physical Installation. The Setup Wizard automatically searches for any Network Storage System on your network. If it is not detected, check its cable connections, and make sure it is powered on. Click Search Again to locate the Network Storage System. Select the appropriate Network Storage System. Click Next. To install the second hard drive:
Power off the Network Storage System. Push together the clips, and remove the lower drive bay door. Lift up the ribbon. Make sure the connector side of the drive faces the bay, and the label side faces up. Make sure the drive is inserted under the ribbon. Push the drive in until it snugly fits in the bay. Replace the drive bay door. Wait until you hear the Network Storage System
beep twice. Then click Next. The NAS200 has an easy array of options for configuring your internal disks. With two disks installed, you can run them as separate volumes, one large volume or have the two play off each other in RAID 0 or RAID 1 configurations. All this is done in a few mouse clicks. But beware, changing a disk or recovering from a disk crash with a new one means rebuilding the NAS200 from the ground up. So be sure to backup the NAS200 occasionally, too. Once your NAS200 goe through basic setup, you can maintain it or enable advanced features from a Web-based administration console. Or you can simply browse the box using a Web browser, which is especially useful if you've enabled the FTP server option

Firmware Release for WAG160N.

New Firmware Released for WAG160N.

Firmware Version : 1.00.09 (ETSI)

Release Date : 23 May, 2008

Fixes :

- Fixes issue with FTP failure after 2 days.

- Fixes issue with Cisco IPSec client

- Fixes issue with slowdown when using Azureus in MAC OS

- Fixes issue with SIP registeration when WAN IP Address changes

- Fixes issue with WUSB300N client over WPA-TKIP

- Change GUI display

Click here to download the firmware.

WVC54GCA

WVC54GCA : Wireless-G Internet Home Monitoring Camera. Send live audio and video to a web browser anywhere !

• Sends high-quality live audio and video to your network wirelessly – viewable from most web browsers, anywhere in the world

• Built-in video stream encoder and stand-alone web server – no PC necessary
  

• Security Mode automatically sends email alerts with video clips upon motion detection
  

• Supports MPEG-4 and MJPEG video at up to 640x480, and up to four simultaneous remote users

WVC54GCA sends live video through the Internet to a web browser anywhere in the world. This compact, self-contained unit lets you keep track of your home, your room, your workplace -- whatever's important to you.

Unlike standard "web cams" that require an attached PC, the Internet Home Monitoring Camera contains its own web server, so it can connect directly to a network, either over Wireless-G (802.11g) networking, or over 10/100 Ethernet cable. Choose either MPEG-4 or Motion JPEG video compression for a high-quality, high-framerate, up to 640x480 video stream.

The Compact Internet Home Monitoring Camera's unique form-factor and wireless connectivity allows you to mount it on a wall nearly anywhere, or slip it into its included stand for desktop use. Once it's connected to your home network, you can "see what it sees" from any PC in the house, while the video stream is secured from the outside world, hidden behind your Router. If you want the video to be visible from outside your home network, you can open an appropriate port on the Router, and then create password protected accounts to manage access to the camera, or leave it wide open for the world to see. The TZO domain service (one-year trial sign-up included) lets you access your camera using an easy-to-remember "name", even if your home Internet connection uses a dynamic IP address.

You can also turn on Security Mode, which tells the camera to send a message with a short video attached to up to three email addresses whenever it detects motion in its field of view. You can then log onto the live video stream if the situation warrants. The included Viewer & Recorder utility lets you record the audio/video stream to your local hard drive, "live" or on a predetermined schedule.

Enabling Email Alerts in WVC200

How to enable E-Mail alerts in WVC200


E-Mail alerts can be enabled from the Options TAB in Setup.
You need the SMTP mail server address to specify the Outgoing server.


You can choose to be notified when the Camera detects motion in its field of view. You will be sent a text-only email or an e-mail with video attached. To get the video in the mails, you need to enable to Email Video
Enable E-mail Alert - If you want to be notified by e-mail when the Camera detects motion, then select Enable from the drop-down menu. Otherwise, select Disable.
NOTE: Motion detection can be triggered by rapid changes in lighting condition, as well as by moving objects. For this reason, it should only be used indoors.
To save your changes, click the Apply option. To cancel any unsaved changes, click the Cancel option. To get additional information about the screen's features, click .