Configure WVC54GC with Belkin Router !

How to Configure WVC54GC with a Belkin Router.

• The Linksys camera's Default IP Address is 192.168.1.115.
  
• The Belkin Router's Default IP Address is 192.168.2.1
  
• First, connect a computer to the camera with an Ethernet cable.
  
• Assign a Static IP Address to the computer : 192.168.1.10
  
• The Subnet Mask should be 255.255.255.0
  
• Default Gateway is not necessary.
  
• Open Internet Explorer, in the Address Bar type 192.168.1.115
  
• The Username and passwod is admin.
  
• On the setup page of the camera, click Setup.
  
• Change the IP Address to 192.168.2.115 [ from 192.168.1.115 ].
  
• In the Gateway, type the IP Address of the Belkin router [192.68.2.1].
  
• In the Wireless settings, put the SSID and security Exactly similar to that of the Belkin router.
  
• Network Type : Infrastructure. Save Settings. Remove the static IP from the computer.
  
• Powercycle the network. Port 1024 needs to be forwarded on the Belkin router.
  

It should work. :)