Firmware Release for WAG200G.

New Firmware Released for WAG200G.

Firmware Version : 1.01.06 (ETSI)
Release Date : 17 December, 2007

Fixes :
- Fixes security issue with XSS and CSRF.
- Fixes security issue with XSS and CSRF.
- Fixes issue with UPnP crash when opening 10+ port forwarding.
- Fixes issue with port 5190, 5566, 4443 opening.
- Fixes issue with DSL performance degradation when running P2P program for long time.
- Fixes issue with Access Restriction
- Use new Cisco/Linksys Logo.
- Added Single Port Forwarding entries to 20.

Click Here to download the firmware.

Configure WVC54GC with Belkin Router !

How to Configure WVC54GC with a Belkin Router.

• The Linksys camera's Default IP Address is 192.168.1.115.
  
• The Belkin Router's Default IP Address is 192.168.2.1
  
• First, connect a computer to the camera with an Ethernet cable.
  
• Assign a Static IP Address to the computer : 192.168.1.10
  
• The Subnet Mask should be 255.255.255.0
  
• Default Gateway is not necessary.
  
• Open Internet Explorer, in the Address Bar type 192.168.1.115
  
• The Username and passwod is admin.
  
• On the setup page of the camera, click Setup.
  
• Change the IP Address to 192.168.2.115 [ from 192.168.1.115 ].
  
• In the Gateway, type the IP Address of the Belkin router [192.68.2.1].
  
• In the Wireless settings, put the SSID and security Exactly similar to that of the Belkin router.
  
• Network Type : Infrastructure. Save Settings. Remove the static IP from the computer.
  
• Powercycle the network. Port 1024 needs to be forwarded on the Belkin router.
  

It should work. :)

Character Counter

Character counter :

This free script provided by JavaScript Kit

WRT160N

WRT160N : Ultra RangePlus Wireless-N Broadband Router

• Internet-sharing Router and 4-port Switch, with a built in speed and range enhanced Wireless Access Point
• MIMO technology uses multiple radios to create a robust signal that travels farther and reduces dead spots
• Much faster than Wireless-G, but also works great with Wireless-G and -B devices
• Wireless signals protected by wireless encryption, and your network protected from Internet attacks by a powerful SPI firewall

How to connect WRT160N with Virginmedia in UK.

• Connect the computer to any 1 of the 4 ports on the router.
  
• Reset the router for 10 seconds. The reset button is located at theback side of the router.
  
• The Powerlight on the router starts flashing. Turn the router OFF & turn the modem OFF.
  
• Turn the Modem ON first. Wait for 10 seconds. Turn the router ON.
  
• Try Internet from the computer connected to the router.
  
• You should be able to go online. If you are not abble to go online, Check the following : 
  
• The computer is not assigned a Static IP Address. If it is, change the setting to Obtain IP Address Automatically.
  
• Also check the DNS is assigned to Obtain Automatically.
  
• The connection is done properly.
  
• To open the Setup page, the default IP Address is : 192.168.1.1
• The default password is admin.
• This process applies to all Linksys routers like WRT54G, WRT54GR, WRT54GC, WRT54GL, WRT54GS, WRT100, WRT150N, WRT160N, WRT300N, WRT310N, WRT330N, WRT350N, WRT600N, WRT610N etc
  

Firmware Release for WAG54GS.

New Firmware Released for WAG54GS.

Firmware version : 1.01.03
Release Date : 17 August 2007

Fixes :
- Adds languange select option on the Basic Setup page
- Resolves issue with XSS & CSRF security
- Resolves issue with WWW access when static MTU is set
- Resolves issue with UPnP failure with Mac OS Lighthouse application
- Resolves issue with P2P applications
- Resolves issue with E-mail alert characters
- Resolves issue with configuration of multiple Access Restriction policies
- Resolves issue with open ports 4443, 5190, and 5566 during port scan
- Resolves issue with GUI display with Windows 120DPI setting
- Resolves issue with AT&T VPN client

Click here to download the firmware.